- Check a condition of a poliklinovy belt and its arrangement on pulleys.
|
|
- Check a belt tension, having pressured him by effort 100 N in the place located on identical removal from pulleys and measure a belt deflection.
|
|
|
- Check correctness of an arrangement of edges of a poliklinovy belt in flutes of pulleys.
- If during the work poliklinovy the belt publishes extraneous noise, check a belt for lack of wear and damages, and also working surfaces of pulleys.
|
|
|
- The tension of a belt has to be measured precisely on the center between pulleys.
- When the new belt is established, regulate a tension to the average value given in the column "New". The belt which worked on the engine more than 5 min. is considered the belt which was in the use and its tension needs to be regulated to the average value given in the column "Being in the Use".
- At adjustment of a tension of the belt which was in the use or the belt which worked on the engine more than 5 min. it is necessary to regulate its tension to the average value given in the column "Being in the Use".
- At periodic surveys it is necessary to be guided by the column "Check".
|
Measurement of a tension special device of A type
|
|
At measurement of a tension of a poliklinovy belt the device should not concern other elements of the engine.
|
Measurement of a tension special device of V type
- At measurement be convinced that turned the button of repeated installation in the direction of an arrow to establish an arrow of the device in an initial state.
- After removal of the device from a belt of the shooter of the device will still specify a belt tension.
|