Fix captures of the load-lifting mechanism for eyes of the engine and lift so that the weight of the engine was perceived by the load-lifting mechanism.
Turn out bolts of fastening of a support of the engine.
Remove an engine support from the engine.
On cars with the mechanical transmission remove the gear shifting lever.
Turn out a bolt of fastening of the transmission.
Remove protection of an arch of the right wheel. Turn out bolts of fastening of an arm of the transmission.
Remove a transmission arm.
Turn out the top and lower bolts of fastening of a forward support of the engine. Remove a forward support of the engine.
Turn out a bolt and remove a back support of the engine from the lower frame.
Installation
PERFORMANCE ORDER
Check that the roller stopper is correctly installed in the plug and does not move in it.
Establish a roller stopper.
Establish a forward support of the engine under a certain corner.
Cars with the automatic transmission: 30±3 ° Cars with the mechanical transmission: 14±3 °
Establish a back support of the engine under a certain corner.
Cars with the automatic transmission: 33±3 ° Cars with the mechanical transmission: 20±3 °
Installation of the plug
Forward and back plugs of a submotor frame have to be strictly focused.
Make sure that installed plugs in the correct situation.
PERFORMANCE ORDER
On the top party of forward and back cross-pieces there are 2 shooters defining position of plugs.
At installation of plugs in nests of cross-pieces combine arrows on plugs with the direction of side elements.
Make sure that plugs are installed parallel to side elements of a cross-piece. Make sure that the direction of installation of plugs does not deviate more, than on ±3 ° the direction of a side element.