- Install the car on the flat horizontal platform.
- Start the engine and warm up liquid of the amplifier of steering up to the temperature of 50 ~ 60 °C for what turn a steering wheel from an emphasis against the stop several times.
- During the operation of the engine idling turn a steering wheel from an emphasis against the stop several times.
- Check that in a tank of the amplifier of steering there is no foaming.
- Switch off the engine and check a difference of levels of liquid in a tank at the working and switched off engine.
|
|
- If a difference of levels of liquid more than 5 mm, remove air from the drive of the amplifier of steering.
- If liquid level suddenly increases after switching off of the engine, further pumping of the hydraulic drive of the amplifier of steering is not required.
- Incomplete pumping of the hydraulic drive of the amplifier of steering leads to emergence of the noise published by the pump and reduces durability of operation of the pump.
|
|
|