14:15. Hoses of the amplifier of steering
|
At connection of a pipe and a hose be convinced that combined tags of white color on each element.
|
Pressure head hose and pipe
|
|
- Remove an airintaking branch pipe.
|
|
- Remove a clip of fastening of a pressure head hose.
|
- Disconnect a pipe fitting from steering transfer.
- Lift the car and remove the clip fixing pressure head and returnable tubes.
|
- Lower the car and remove a connector (24 mm).
|
|
- Pick up a pressure head hose and the phone.
|
- Installation is carried out to the sequences, the return to removal.
|
- Establish a pressure head hose and a tube so that they were not overwound and did not concern mobile elements of the car.
- Pump over the hydraulic drive of the amplifier of steering.
|
|
|
Returnable hose and pipe
|
|
- Remove a tank of the amplifier of steering from an arm.
|
- Remove clips of fastening of a returnable pipe and a hose.
|
- Remove an airintaking branch pipe.
|
- Disconnect a pressure head pipe and a fitting of a returnable pipe from steering transfer.
|
- Lift the car and remove the clip fixing pressure head and returnable tubes.
|
|
- Lower the car and remove a clip of fastening of a returnable tube and a hose.
|
|
- Installation is carried out to the sequences, the return to removal.
|
|
- Establish a returnable hose and a tube so that they were not overwound and did not concern mobile elements of the car.
- Pump over the hydraulic drive of the amplifier of steering.
|
|
|
Check
|
- Manually twisting a hose, check it for absence of damage or cracks.
- Make sure that there is no contact between a hose and other elements of the car.
|
|