14:18. Search and elimination of malfunctions of steering

Sign
Probable cause
Elimination method
The increased free wheeling of a steering wheel Connection in the universal hinge is weakened Tighten
Bolts of steering transfer are unreliably tightened Tighten bolts
Big side play or wear of a tip of steering draft Replace a tip of steering draft
The steering wheel turns hardly Insufficient tension of a belt Adjust a belt tension
Damage of a belt Replace a belt
Add liquid Low level of liquid
Air in liquid Remove air from liquid
Hoses are pressed or damaged Arrange correctly or replace
The insufficient pressure created by the pump Repair or replace the pump
Sticking of the valve of adjustment of pressure Replace
Internal leaks in the pump of the amplifier of steering Replace the damaged details
Excessive infiltration of liquid from a gear lath and a gear wheel in a case of steering transfer Replace the damaged details
Damage of a case of steering transfer or valve of adjustment of pressure Replace the damaged details
The steering wheel does not come back to a starting position properly Too big moment of a provorachivaniye of the spherical hinge of a tip of steering draft Replace a tip of steering draft
Too hard universal hinge Adjust
Internal connection of steering draft or the spherical hinge are turned hardly Grease or replace the spherical hinge
It is weakened fastenings of steering transfer in an arm Tighten
Hinges of a steering shaft or sealing ring of a body are worn-out Replace
Steering transfer is damaged Replace steering transfer
The bearing of a gear wheel of steering transfer is damaged Replace
Hoses are overwound or damaged Replace hoses
The valve of adjustment of pressure is damaged Replace
The bearing of a shaft of the pump of the amplifier of steering is damaged Replace
Extraneous noise during the steering work

The hissing sound in steering transfer

All amplifiers of steering publish additional noise. One of the most widespread is a hissing sound when the steering wheel is turned on the motionless car. This sound will be most obvious at turn of a steering wheel at the pressed brake pedal.

There are no relations between this noise and work of steering. Do not replace the valve if the "hissing" noise does not become extraordinary. The new valve will also publish small noise.

The roaring sound in steering transfer Side play between hoses and a body of the car Lay properly and fix hoses
Steering transfer is not fixed Fix steering transfer
The tip of steering draft and / or the spherical hinge is not fixed Delay connections
The tip of steering draft and / or the spherical hinge is worn-out Replace
Noise in the pump of the amplifier of steering Low level of liquid Add liquid
Air in liquid Remove air
Bolts of fastening of the pump are not tightened Tighten bolts

Quiet noise has to be heard right after launch of the engine at the air temperature of -20 °C. It is connected with properties of the liquid applied in the amplifier of steering and is not a malfunction sign.