- On the car standing on a firm horizontal surface establish forward wheels for the rectilinear movement.
- Increase the frequency of rotation of a bent shaft of the engine up to 1000±100 min.-1.
|
|
After check leave the engine to work at idling rotation frequency |
|
|
- Hook on a dynamometer for a spoke of a steering wheel in the place, the most remote from the center of a wheel. With the forward wheels established for the rectilinear movement measure effort which needs to be put to a steering wheel for turn of wheels to the left and to the right on 1/4 turns.
Effort: 29 N.
|
- Check that at turn of a steering wheel application of excessive efforts is not demanded.
- If the measured effort exceeds the required value, carry out the following inspections:
– check protective covers of spherical hinges of the lower lever and a tip of steering draft for lack of damage;
– torque which needs to be put for a provorachivaniye of a pin of the spherical hinge of a tip of steering draft;
– torque which needs to be put for a provorachivaniye of a pin of the spherical hinge of the lower lever.
|
|