- Install the selector lever in situation "N".
- From the transmission weaken a nut of fastening of a cable of management to the lever, for release of a cable and a control lever.
|
|
- Install the selector lever in neutral situation.
|
|
|
- Weaken assembly bolts of fastening of the case of the switch of ranges of the transmission, then turn the case of the switch of ranges of the transmission, so that were combined an opening on the end of a control lever and an opening in a ledge of the case of the switch of ranges of the transmission.
|
- Tighten assembly bolts of fastening of the case of the switch of ranges of the transmission the inhaling moment given in the specification. Be careful that when tightening bolts not to displace the switch case.
- Softly press a cable of control of the transmission in the direction of an arrow and then tighten an adjusting nut.
- Check that the lever of the selector is in situation "N".
|
|
- Check work and functioning of the switch for each position of the lever of the selector.
|
|
|