- Warm up the engine up to the normal working temperature and switch off it.
- Stop the engine.
|
- Uncover an oil-filling mouth and turn out a stopper of discharge of oil from the oil pallet. Wait until all oil flows down from the oil pallet.
|
- Screw a stopper of discharge of oil with new laying. Inhaling moments: 35–45 N • m.
- Fill in necessary amount of the required engine oil in the engine.
Volume of engine oil:
L engines 2,0 / 1,8
Without replacement of an oil filter: 3,5 l With replacement of an oil filter: 3,7 l
Engine of 1,6 l
Without replacement of an oil filter: 3,0 l With replacement of an oil filter: 3,3 l
Diesel engine of 2,0 l
Without replacement of an oil filter: 5,4 l Oil filter: 0,5 l With replacement of an oil filter: 5,9 l
|
Do not pour oil as it will lead to foaming of oil and reduction of pressure in the lubrication system. |
- Establish a cover on an oil-filling mouth.
- Launch the engine and check lack of leak of oil.
- Check the level of engine oil and, if necessary, bring it to norm.
|
|