16.6. Back door
Removal and installation
|
|
|
|
- Turn out the screw of fastening of the internal handle and remove it from a door upholstery.
|
|
|
- Turn out screws of fastening of an upholstery of a door.
|
|
|
- Insert a door upholstery stripper between an upholstery of a door and a door and release percussion caps. Disconnect electric sockets.
|
|
|
- Remove a moisture protective film from a forward door.
|
|
|
- Lower door glass down and turn out glass fastening screws.
|
|
|
- Remove the operated glass from a back door.
|
|
|
- Remove the dividing channel from a back door, then remove glass of a back door.
|
|
|
- Remove motionless glass from a back door.
|
|
|
- Disconnect draft from the external handle of a door. Turn out bolts of fastening of the lock and drive of the lock.
|
|
|
- Remove the control unit from a back door.
|
|
|
- Installation is carried out to the sequences, the return to removal. At installation of a moisture protective film openings for door upholstery fasteners should not be closed.
|
|
|
Adjustment of provision of a door
Check that the door is closed easily and properly, then check uniformity of gaps between forward and back, top and lower parts of a door and a body. Doors and sides of a body have to be parralelna.
Shock plate of a door
Check that the door is closed easily and properly. If necessary adjust a door as follows.
|
|
- If the lock of a door is put on a shock plate hardly, turn out screws of fastening of a shock plate and, moving it in the horizontal and vertical planes, achieve normal closing of a door.
|
|
- You carry out adjustment of provision of a door of rather adjacent surfaces by movement of a shock plate in the vertical plane.
|
|
|
|
|
For check of smoothness of landing of a shock plate pull the external handle of a door outside and in this situation press a door in the provision of its closing. |