16:17. Seat belts

Removal and installation

 PERFORMANCE ORDER

  1. Turn out a bolt of the lower fastening of a forward seat belt and an edge of the flat screw-driver lift up and remove an upholstery of an average rack. Inhaling moment: 40–55 N • m.
  1. Turn out a bolt of the top fastening of a forward seat belt. Inhaling moment: 40–55 N • m.
  1. If the car the equipment preliminary natyazhitel of seat belts, disconnect a wire from the negative plug of the rechargeable battery, disconnect the socket from a gas generator and remove a natyazhitel of a seat belt.
  1. Installation is carried out to the sequences, the return to removal.

  1. The module of a prednatyazhitel of a seat belt works only once.
  2. Do not sort and do not repair the module of a prednatyazhitel of a seat belt.
  3. Do not drop the module of a prednatyazhitel of a seat belt and do not allow its contact with water, lubricant, etc. If dents, cracks, deformation or corrosion are found, replace the module.
  4. Connect a wire to the negative plug of the rechargeable battery only after the correct installation of the module of a prednatyazhitel of a seat belt.
  5. Removal of the module of a prednatyazhitel of a seat belt:
    • Make sure that ignition is switched off.
    • Disconnect a wire from the negative plug of the rechargeable battery and be convinced that it does not concern a body.
    • Wait 1 minute.
    • Disconnect the electric socket from a gas generator.
    • Turn out a bolt and remove the module of a prednatyazhitel of a seat belt.