3fe16a8a

16.2. Adjustment of hinges of a cowl


 PERFORMANCE ORDER

  1. Moving a cowl, adjust its situation so that at the closed cowl the gap on perimeter of a cowl was identical from all directions. After adjustment tighten bolts of fastening of hinges of a cowl.
  1. Check that at the closed cowl rubber buffers support a forward part of a cowl. Otherwise, adjust height of installation of rubber buffers, rotating them in the relevant parties.
  1. Check alignment of a latch and shock plate of a cowl.
  1. If necessary, weaken bolts and, moving, adjust the provision of a shock plate of a cowl.