7.8. High-voltage wires
The wrong installation and arrangement of high-voltage wires can lead to a spark proskakivaniye from a wire on a wire or on "weight" that, in turn, can lead to admissions of ignition and reduction of frequency of rotation of a bent shaft at the movement of the car at great speed.
Therefore establish high-voltage wires properly, as shown in drawings.
Check
|
- Disconnect high-voltage wires from candles and coils of ignition. Clear and check integrity of isolation of high-voltage wires. Check the internal surfaces of contacts of high-voltage wires for lack of corrosion or a deposit.
- Measure by an ohmmeter resistance of high-voltage wires.
High-voltage wires
|
Cylinder |
No. 1
|
No. 2
|
No. 3
|
No. 4
|
Length, mm |
560
|
440
|
360
|
310
|
Resistance (BOUGI), Ohm |
2,51–3,76
|
1,97–2,96
|
1,61–2,42
|
1,39–2,08
|
Resistance (R16AIPS), Ohm |
5,60–11,76
|
4,40–9,24
|
3,60–7,56
|
3,10–6,51
|
|
Resistance of a high-voltage wire should not exceed 10 000 Ohms, otherwise replace a wire. |
|
|