17:21. Block of heating and ventilation

Removal

 PERFORMANCE ORDER

  1. Disconnect a wire from the negative plug of the rechargeable battery.
  1. Disconnect electric sockets from front seats and remove sitting.

At removal of front seats do not damage an upholstery of interior of the car.

  1. After removal of the handle from the gear shifting lever, an edge of the flat screw-driver remove the top cover of the console.
  1. Turn out screws and remove the floor console.
  1. Remove side covers from the floor console.
  1. Remove a safety cushion of the driver.

For removal of a safety cushion you watch the corresponding description.

  1. Remove a steering wheel.
  1. Turn out screws of fastening of the lower casing of a steering column and remove it.
  1. Remove a spiral spring of a safety cushion of the driver.
  1. Disconnect the socket and remove the multipurpose switch.
  1. Turn out screws of fastening of a combination of devices.
  1. Remove an ashtray, then turn out screws of fastening of a combination of devices and remove it.
  1. Disconnect sockets from a combination of devices.
  1. Remove a combination of devices.
  1. Remove the radio receiver and the control panel of the conditioner.
  1. Turn out screws of fastening of the lower decorative panel located under the dashboard.
  1. Turn out screws of fastening of the side decorative panel and remove it from the dashboard.
  1. Remove an arm of support of the dashboard from the driver.
  1. Turn out bolts of fastening of a steering column and remove it.
  1. Remove an upholstery from a forward door and the lower finishing of a forward rack.
  1. Disconnect sockets from the dashboard.
  1. Remove a lattice of a heater and turn out bolts of fastening of the dashboard.
  1. Remove side covers from the lower part of the dashboard and turn out bolts of fastening of the dashboard.
  1. Turn out bolts of fastening of the dashboard to the central arm and a ware box.
  1. Turn out other bolts of fastening of the dashboard.
  1. Remove the dashboard.
  1. Turn out a nut of fastening of the evaporator.
  2. Remove the evaporator block.
  3. Turn out nuts of fastening of a forward cross-piece of a motor compartment and remove it.
  4. Turn out nuts of fastening of a heater.
  5. Remove the heater block.

Installation

Installation is carried out to the sequences, the return to removal, taking into account reliable connection of all sockets.