17:14. Conditioner compressor

Conditioner compressor elements

1 – the compressor with the coupling
2 – compressor
3 – cylinder and shaft
4 – forward cylinder
5 – back cylinder
6 – plug
7 – ring A bearings
8 – bearing
9 – ring of the L bearing
10 – the disk established at an angle to a shaft
11 – shaft
12 – block
13 – piston
14 – ring E bearings
15 – spring
16 – entrance plate
17 – block of a forward plate
18 – forward plate
19 – hairpin
20 – block of a back plate
21 – back plate
22 – unloading element
23 – forward laying
24 – back laying
25 – sealing ring
26 – back section of the compressor

27 – forward section of the compressor
28 – bolt
29 – flat washer
30 – consolidation of a shaft
31 – ring
32–1 – consolidation
32–2 – adjusting plug
32–3 – adjusting plug
33 – excitement coil
34 – pulley
35 – disk and nave
36 – ring
37 – laying
38 – bolt
39 – screw
40 – socket arm
41 – collector knot
42 – collector
43 – absorption branch pipe
44 – discharge branch pipe
45 – safety valve
46 – sealing ring of round section
47 – hairpin
48 – bolt
49 – wrench
50 – laying


Removal and installation

 PERFORMANCE ORDER

  1. Weaken a tension and take off a conditioner compressor drive belt.
  1. Discharge the air conditioning system.
  1. Remove a hose of a discharge and the soaking-up hose.
  1. Remove the conditioner compressor. Immediately close all open openings and tubes for an exception of hit of moisture of air in the air conditioning system.
  2. Installation is carried out to the sequences, the return to removal.