11.7. Adjustment of the switch of indication of position of the lever of the selector (A4AF3)

 PERFORMANCE ORDER

  1. Move the selector lever to a position N.
  2. Weaken a control lever lock-nut in a junction of a cable and the lever.
  1. Move a control lever to situation N.
  1. Turn the case of the switch of indication of position of the lever of the selector on distance to 12 mm and combine the wide end of a control lever with a switch ledge.
  2. Tighten bolts of fastening of the switch the moment of an inhaling of 10-12 N • m.

At turn of the case of the switch be careful not to damage a sealing ring.

  1. Check that the lever of the selector is in a position N.
  1. Adjust the provision of a nut so that there was no sagging of a cable and the lever of the selector moved smoothly.
  1. Make a control trip and be convinced that the transmission is installed in the situation corresponding to each position of the lever of the selector.