10.1. Specifications

Specifications

Model
M5BF2
Engine
1,6 DOHC
1,8 DOHC
2,0 DOHC
Type 5 transfers for advance and 1 transfer for the movement back
Transfer number
1st transfer
3,615
3,615
3,615
2nd transfer
2,053
2,053
2,053
3rd transfer
1,393
1,37
1,393
4th transfer
1,061
1,031
1,061
5th transfer
0,837
0,837
0,837
Transfer of a backing
3,25
3,25
3,25
Transfer number of the main transfer
4,056
3,842
3,65

General information

The transmission will transform the torque transferred from the engine in size and the direction. It is necessary for ensuring optimum speed and passability of the car, and also for the most economic operation of the engine and the movement of the car a backing. Besides, the transmission separates the engine and transmission during a stop and the parking of the car and at its movement on inertia with the working engine.
Details of the transmission are placed in a case which is screwed by bolts on a back part of the engine.

The torque from the engine through coupling is transferred to an entrance shaft of the transmission. An output shaft the transmission transmits torque through differential to power shafts. Inclusion of transfer is carried out by movement of the sliding synchronizer coupling therefore the gear wheel rigidly connects to a transmission shaft.

The transmission represents very difficult unit and its repair it is necessary to make in a specialized workshop therefore only removal and installation of the transmission are given in the present chapter.
For removal of the transmission it is necessary to lift the car and to enshrine it in this provision. Use of a stationary jack is also necessary.